Cable and it's accesories

Employees only

Mail Check

Canada: 416 822 8094 or Bangladesh: 01715068227


Flexible Cable
Our 7-strand cable is pliable for workability and galvanized to resist corrosion.

Choose from below:
Model # Cable-1/4"
Stealth 1/4" x 250' Break strength: 1,900 lbs

Model # Cable-3/8"
Stealth 3/8" x 150' Break strength: 4,250 lbs

Model # Cable-5/16"
Stealth 5/16" x 200' Break strength: 3,200 lbs



Our strong U.S. made eyebolts feature cut (rather than rolled) lag screw thread and come complete with nut and washer. They are zinc plated for corrosion resistance.

Diameter of "
Length to choose: 6", 8", 10", 12", 18"

Diameter of 5/8"
Length to choose: 8", 10", 12", 18", 24", 30"

To order: specify diameter (1/2" or 5/8") and Length


Cable Clips

Clip for cable. Minimum 4 clips per end U-bolt style clips are tightened with two hex nuts. For adequate hold, several clips are required on each cable end. The space between the clips should be six times the diameter of the cable used.

To order: 
Specify cable size (1/4" or 3/16" or 3/8" or 5/16"


Lag Hooks

Lag hook with left hand thread. These strong lag thread J-bolts meet or exceed all standards for arborist applications. They are bright plated for corrosion resistance. These hooks are available in left hand and right hand thread.

To order:
#LAG-1/2LH. 1/2" x 6" lag hook with left hand thread
#LAG-1/2RH. 1/2" x 6 lag hook with right hand thread
#LAG-3/8LH. 3/8"x 4.5" lag hook with left hand thread
#LAG-3/8RH. 3/8" x 4.5" lag hook with right hand thread
#LAG-5/8LH. 5/8" x 6" lag hook with left hand thread.
#LAG-5/8RH. 5/8" x 6" lag hook with right hand thread


Trimble for Cable

Steel thimble for cable; galvanized for rust resistance. Wrap cable end around this thimble when connecting to a lag hook. Use cable clips to secure the cable end.

To order:
Sizes: 1/4" or 3/8" or 5/16"


Tree Grip

Designed to replace the tedious process of splicing our flexible cable, Tree Grips can be quickly wrapped on cable end. Buy according to size of cable to be used. A color band identifies the size.

To order:
Sizes: 1/4" or 3/8" or 3/16" or 5/16"
Color: black, orange, red and yellow


Tree RodOur Tree Rod is U.S. made and features cut lag thread along its entire length. Lag thread is strong and provides good grip as well as rapid threading of nuts. All rods come standard in a 12' length and so must be shipped by truck freight. For a nominal charge, we can cut the rod (i.e. into two 6' pieces) so it can be shipped by UPS. Just ask.To order: Specify Diameter of the rod

Sizes: 1/4" or 3/4" or 5/8" or 7/8"

[Home] [Products] [Turbine Parts] [Instruments] [Utility Supply] [Ladders] [Data Acquisiton] [Engineering Services] [Certifications] [Contact Us] [Media Library] [simpics]